1.Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
2.Strong load ability, constant discharge current 10A~250A, use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help to cool.
3.IC itself has a power balancing function. The circuit is simple and reliable.
4.Typical voltage detection for each cell. So each battery will be prevented over charged or over-discharged. Over current and short circuit protection function is very reliable. long time short circuit of the load won’t affect the PCB and the battery. Temperature protection during charging and discharging.
5.Extreme low power consumption. the consumption of the whole device is less than 50uA.
6.PCB use high anti-corrosion, high water resistance, high impedance ESD conformal coating.
Specification as below:
| Name | Item | Spec |
| Power balancing | Power balancing | 2.65V |
| Balance release volt | 2.65V | |
| Balance current | 40±5mA | |
| Over-discharge protection | Over-discharge detect volt | 2.8±0.05V |
| Over-discharge detect delay | 0.5V | |
| Over-discharge volt release | 3.0±0.05V | |
| Over-current protection | Overcurrent detect volt | 150mV |
| Overcurrent detect delay | 9MS | |
| Over-current protection | Can be customized | |
| Overcurrent protect release | Disconnect load | |
| Short circuit protection | Short circuit protection | External load short circuit |
| Short circuit detect delay | 250uS | |
| The short circuit detects the release | Disconnect load | |
| Temperature protection | Can be customized | |
| Resistance | Main circuit resistor | ≤10mΩ |
| Self-consumption | Working current | ≤100uA |
| Sleepy current (when the battery is over-discharged ) | ≤20uA | |
| Working temp | Temp range | -20/+80ºC |
